LANGUAGE
Titanium rod/bar
titanium anode
Titanium tubes
Titanium sheets
Titanium screw
titanium foil
titanium wire
NICKEL
bearings
Roller bolt bearing
Technical updates
Exhibition updates
Company dynamics
Fully loaded cylindrical roller bearings
Bearing without outer ring
Home > News Center>Company dynamics
New Product
Detailed explanation of the difference between nickel pig iron and nickel ironWhen discussing the difference between nickel iron and nickel pig iron, the key is to understand their chemical composition and application scenarios. Here are the main dif......
Titanium tubes are light in weight, high in strength, and have excellent mechanical properties. They are widely used in heat exchange equipment, such as shell-and-tube heat exchangers, coil heat exchangers, serpentine heat exchangers, condensers, eva......
1. Titanium tubes have plasticity. The elongation of high-purity titanium tubes can reach 50-60%, and the cross-sectional shrinkage can reach 70-80%. Although the strength of high-purity titanium tubes is low, a small amount of impurities and the add......
An alloy composed of nickel and other elements. Monel alloy containing about 30% copper produced around 1905 is an earlier nickel alloy. nickel Alloy has good mechanical, physical and chemical properties. Adding appropriate elements can improve its o......
After 70 years of development, Chinas titanium metal industry has now become the worlds largest producer and consumer of titanium metal. From a cumulative production of 1,000 tons over ten years in the 1970s, to 10,000 tons in the 1990s, and then to ......
Impact of bearing storage for too long: the characteristics of the lubricating grease in the bearing may be affected after long-term storage of the bearing with sealing ring or dust cover.Scientific storage of imported bearings is very important. If ......
Imported bearings can be used for 2-5 years, while domestic bearings are generally more than 2-4 years. At present, the main shaft bearings are mostly unnatural damage, and most of them are premature damage caused by bearing the intrusion of foreign ......
P4 bearing has higher dimensional precision and rotation precision than P5 bearing.The grades of bearings are divided into four levels: po-p6-p5-p4-p2. Po level is the national standard and the most common standard in the bearing industry, so it is a......
86-0917-3116980 86-0917-3600231
"Sincerity, Profession, and Win-Win" is our business philosophy.
info@tirongmetal.comxiaoying@junde-tech.com
Company Profile
Corporate Honors
Home
Product Center
Company Video
News Center
Contact Us
Case Center
Copyright @ 2023 BAOJI TAIRONG METAL MATERIAL TECHNOLOGY CO., LTD
Copyright 2018 a-life.cn All Rights Reserved
此站支持多端浏览
Business License Registration No.: 440301103091708 Copyright 2018 a-life.cn All Rights Reserved Headquarters address: 2604, 2605, Huichao science and technology building, Jinhai Road, Bao'an District, Shenzhen postcode: 518101